How to Install a Hitch on a Subaru Outback

Installing a trailer hitch on your Subaru is a relatively easy process that can be completed in about an hour. Before you begin, make sure you have all the necessary tools and parts. You will need a drill, screwdriver, wrench, and socket set.

You will also need the trailer hitch itself, as well as any bolts or other hardware that may be required. Once you have everything you need, follow these steps to install your new trailer hitch:

Here’s what you need to do to install a hitch on your Subaru Outback.

  • Park your Subaru Outback in a level area and set the parking brake
  • Chock the rear wheels to prevent the car from rolling while you’re working on it
  • Lift up the back of the car with a jack and support it on jack stands
  • Find the hitch mounting points on the frame of your Outback
  • They will be located behind the bumper near where the exhaust pipe comes out from under the car
  • Place the hitch onto the mounting points and start threading in the bolts that will secure it to the frame
  • Torque them to specifications using a torque wrench
  • Lower your Outback off of the jack stands and remove them from under the car once it is safely resting on its tires again
How To Install A Hitch On A Subaru Outback

Can You Put a Hitch on a Subaru Outback

If you’re a Subaru Outback owner, you might be wondering if you can put a hitch on your car. The answer is yes, you can! There are a few different types of hitches available for the Outback, so you’ll need to choose the one that best suits your needs.

The first type of hitch is the receiver hitch. This type of hitch mounts onto the frame of your Outback and provides a place to attach a trailer or other towable device. Receiver hitches come in various sizes and capacities, so be sure to choose one that’s rated for the weight of whatever you’ll be towed.

The next type of hitch is the ball mount hitch. This type of hitch also mounts onto the frame of your Outback, but instead of having a receiver, it has a ball mount. This allows you to attach a trailer without having to use a receiver.

Ball mount hitches are typically less expensive than receiver hitches, but they’re not as versatile since they can only be used with trailers that have their own couplers (hitches that connect to the ball mount).

Finally, there’s the bumper-mounted hitch. As its name implies, this type of hitch attaches to the bumper of your Outback rather than the frame. Bumper-mounted hitches are usually less expensive than either receiver or ball mount hitches, but they’re not as strong and can’t tow as much weight.

No matter which type of hitch you choose, installing it on your Outback should be fairly easy. Most hitches come with detailed instructions, and there are plenty of online tutorials and videos that can walk you through the process step by step.

If you’re not comfortable doing it yourself, any reputable mechanic or auto body shop should be able to do it for you.

Subaru Outback Trailer Hitch Installation Cost

The cost of installing a trailer hitch on a Subaru Outback will vary depending on the year, model, and trim level of the vehicle. The average cost for installation at a dealership or professional automotive shop is between $200 and $500. This does not include the cost of the actual trailer hitch, which can range from $100 to $300.

If you are comfortable with do-it-yourself projects, it is possible to install a trailer hitch yourself for around $50 to $100 in materials.

Subaru Trailer Hitch Installation near Me

If you’re looking for a Subaru trailer hitch installation near you, there are a few things to keep in mind. First, make sure that the installer is experienced and reputable. There are a lot of different types of hitches out there, and not all installers are familiar with all of them.

Second, ask around for recommendations. Friends, family, and coworkers who have had trailer hitches installed on their own cars can be a great resource.

Finally, make sure to get an estimate from the installer before having any work done.

This way, you’ll know exactly what you’re paying for and can budget accordingly.

FAQ’s to Installing the Hitch on a Subaru Outback

Can You Install a Hitch by Yourself?

You can certainly install a hitch by yourself, but it’s not recommended. There are a few reasons for this.

  1. Hitches are heavy and awkward to handle.
  2. You need to be very precise when installing a hitch – if it’s even slightly off, it could cause problems with towing.
  3. You need special tools to properly install a hitch, which most people don’t have.
  4. Finally, if you’re not experienced with installing hitches, it’s very easy to make a mistake that could damage your vehicle or the trailer you’re trying to tow.

For all of these reasons, we recommend leaving hitch installation to the professionals.

How Do You Install a Hitch on a 2022 Subaru Outback?

Assuming you already have the hitch and wiring harness, installation is a relatively simple process. Here are the basic steps:

1. Park your Outback in a level spot and set the parking brake.

2. Disconnect the negative battery terminal to avoid any shorts while working on the electrical system.

3. Raise the rear of the vehicle using a jack and support it with jack stands.

4. Locate the two bolts at the end of the muffler hanger bracket closest to the bumper fascia and remove them using a socket wrench (you may need an extension).

5. Slide the hitch receiver into place between these two brackets, then replace and tighten the bolts.

6. At this point, you’ll need to connect the wiring harness to your Outback’s taillight assembly.

First, remove the two screws holding down the taillight cover using a Phillips screwdriver.

Then, disconnect the electrical connector for each taillight bulb (there will be one white and one black connector).

Finally, connect each wire from your hitch’s wiring harness to its corresponding connector on your taillights (white to white, black to black), then reattach both connectors and screw in your taillight covers.

How Much is a Trailer Hitch for a Subaru Outback?

If you’re in the market for a trailer hitch for your Subaru Outback, you may be wondering how much it will cost. The answer depends on a few factors, including the year and model of your Outback, as well as the type of trailer hitch you need.

For example, a basic receiver-style trailer hitch for a 2010 Subaru Outback 2.5i wagon might cost around $120, while a more heavy-duty option for a 2018 Outback 3.6R sedan could run closer to $400.

Ultimately, the best way to get an accurate estimate for your specific vehicle is to consult with a qualified automotive specialist.

How Do You Attach a Hitch to a Subaru?

There are a few different ways that you can attach a hitch to a Subaru. The most common way is to use the bolts that are already in place on the frame of the car. You will need to remove the two bolts that are holding the bumper on, and then you can bolt the hitch onto those same holes.

Another way to do it is to use some aftermarket brackets that bolt into place where the bumper bolts go. This is a little more involved, but it will give you a stronger connection. Whichever method you choose, make sure that you get the hitch tight against the frame so that it doesn’t rattle around when you’re driving.

Read More…

Leave a Comment